HD ONE X-S SET(+A3)

PACKAGE CONTENTS

1 Unit HD One X S Main Board
1 Unit HD One X S Serial Board
1 Unit HD One X S Terminal Board
3 Units Flat Cable
Mounting Parts

• Elevator pit copying with encoder
• Internal bridging for early door opening
• Door open leveling
• Ability to adjust the floor from inside the cabin
• Supports up to 3 m/s speed
• Neighboring floor output
• Operates up to 4 groups
• Call transfer in group operation
• 16 stops standard, expandable to 32
• Call lamps and buttons can be connected to the system using just one cable
• Password-protected programming, PUK code protection against unauthorized use
• The last 20 errors; stop information can be monitored from the LCD screen
• In standby mode, the LCD screen can show how long (days, hours) the elevator has been in operation since the last maintenance
• Adjustable maintenance duration, with a warning on the LCD screen when the maintenance duration has expired
• Simple and error-free installation thanks to the internal terminal board, saving time and space on control panel terminals
• Overload function
• Short circuit protected, adjustable display outputs for each stop
• Display outputs can be converted to gray code or binary output
• Direction indicators, out-of-service signal, and busy signal with relay contact outputs; signal partner input for these outputs
• Adjustable parking stop and parking time
• Counter bi-stable switch input for position information
• Position information with 4 channel encoder input
• Option to take the cabin to the first stop upon initial power-up
• Warning function on the LCD screen when the door has been open for a long time or when the stop reversal circuit cannot be detected for a long time
• Adjustable cabin light duration, lock waiting time, waiting time at the floor, maximum high-speed duration, and maximum low-speed duration
• Door opening signal (AUTO) and selection of how this signal operates based on direction indicators
• Manual movement at slow speed using programming buttons
• Option to display the first stop the cabin will go to at each floor change
• Option to move the cabin to the limit switches or floor alignment during revisions
• Selection of the floor with the fully automatic door for elevators with only one fully automatic door
• Electronic phase, phase sequence, and PTC (Motor temperature) control; display of errors related to these controls on the LCD screen, with the ability to disable these functions through parameter selection, and adjustment of phase level sensitivity