HD EKO 10 SET
0 Point - 0 Comment
Category
Brand
Stock Code
9HEDEFSAN/HD-ST022112
Discount Rate
37 %
Discounted Price
119,70 USD
%37
Discount
190,00 USD
119,70 USD
PACKAGE CONTENTS
1 Unit HD Eko 10 Main Board
1 Unit HD Eko 10 Serial Board
1 Unit HD Eko 10 Terminal Board
3 Units Flat Cable
Mounting Parts
- Simple and collective control can operate up to 10 stops
- Internal automatic door relay
- Call lamps and buttons can be connected to the system with one cable
- Simple and error-free installation thanks to the internal terminal board, saving time and space on control panel terminals
- Cabin serial communication output
- All parameters can be easily adjusted using the LCD screen and programming buttons on the board
- Adjustable parking stop and parking time
- In standby mode, the LCD screen can show how long (days, hours) the elevator has been in operation since the last maintenance
- Password-protected programming, with company code protection against unauthorized use
- Counter bi-stable switch input for position information
- Adjustable maintenance duration, with a warning on the LCD screen when the maintenance duration has expired
- Manual movement at slow speed using programming buttons
- Short circuit protected, adjustable display outputs for each stop
- Selection of the floor with the fully automatic door for elevators with only one fully automatic door
- Display outputs can be converted to gray code or binary output
- Overload function
- Option to move the cabin to the limit switches or floor alignment during revisions
- Adjustable cabin light duration, lock waiting time, waiting time at the floor, maximum high-speed duration, and maximum low-speed duration
- Direction indicators, out-of-service signal, and busy signal with relay contact outputs; signal partner input for these outputs
- Option to take the cabin to the first stop upon initial power-up
- Electronic phase, phase sequence, and PTC (Motor temperature) control; display of errors related to these controls on the LCD screen, with the ability to disable these functions through parameter selection, and adjustment of phase level sensitivity
- Warning function on the LCD screen when the door has been open for a long time or when the stop reversal circuit cannot be detected for a long time
Be the first to comment on this product!